Palm Microbeam3 Laser Capture Microdissector, Axiovert 200 w/ AxioVision Lab

Palm Microbeam3 Laser Capture Microdissector with Zeiss Axiovert 200 Microscope

This system was removed from a university laboratory where it was surplus to requirements.

The previous owner stated that the system was in working prior to decommissioning. We recommend that it be re-commissioned by a Zeiss engineer before it is used again.

The system comprises the following:

• 1 x Zeiss Axiovert 200 Manual Inverted Microscope, fitted with:
• 1 x Zeiss HAL 100 Halogen Lamp
• 1 x Zeiss 1005-847 6-Position Condenser (H, Ph1, Ph2, Ph3, DIC, DIC)
• 1 x Zeiss Cap Mover
• 1 x Palm ST2-568-B Automated Stage (software-controlled) with 3x1.0 slide holder
• 1 x 6-Position Nosepiece fitted with objectives:
• Zeiss Fluar/Palm 5x/0.25 ∞/0.17
• Zeiss Fluar/Palm 20x/0.75 ∞/0.17
• Zeiss Plan-NEOFLUAR/Palm 100x/1.30 Oil ∞/0.17
• 1 x Zeiss 1005-827 Binocular Tube 45º/23 with pair of Carl Zeiss 1016-758 W-PI 10x/23 Eyepieces
• 1 x Zeiss 1064-364 5-Position Reflector Turret fitted with Laser, FITC, Rhod, and 2 empty positions
• 1 x Zeiss AxioCam ICc1 Camera

• Illumination and Accessories:
• 1 x Zeiss HBO100 Mercury Lamp with EQB100 PSU
• 1 x Ludl Filter Wheel FW 6 POS W/SH with Ludl MAC5000 Power Base

• Laser Capture Components:
• 1 x Palm Microbeam 3 System
• 1 x Palm Joystick Controller
• 1 x Palm Footswitch
• 1 x Zeiss CryLas Laser Controller
• 1 x Zeiss System Control Box

• Control & Software:
• 1 x HP Z800 PC running Windows 7, pre-installed with:
• Zeiss AxioVision 4.8.2
• Zeiss licence dongle included
• Keyboard, monitor, and mouse included

• Additional Items:
• Original Zeiss AxioVision software disc
• Assorted manuals and spare parts
• All necessary connection cables