Thermo Scientific LTQ-Velos-ETD w/ LTQ Orbitrap Velos Mass Spectrometer S/R

Thermo Scientific LTQ-Velos-ETD with LTQ Orbitrap Velos

This system was removed from a university laboratory where it was surplus to requirements.

The system is in good cosmetic condition with minimal wear. It has not been powered on, as we do not have a connection for a 5-pin 16 Amp red plug at our facility.

The previous owner stated a fault is present with turbo molecular pump number 3, which failed to restart after a power cut. Therefore, it is listed as Spares/Repair

The system comprises the following:

• Thermo Scientific LTQ Orbitrap Velos (Model: LTQ Orbitrap Velos, S/N: SN03195B)
• Thermo Scientific LTQ-Velos-ETD (Model: LTQ-Velos-ETD, S/N: 30361)
• Thermo Scientific ETD (Model: ETD, S/N: EDT10521)
• Dell Optiplex 7040 (Windows 7 Professional) with software installed:
• Thermo Xcalibur 2.2 SP1.48
• LTQ Orbitrap Velos 2.7 / LTQ Tune Plus Version 2.7.0.1103 SP1
• Chromeleon Xpress
• 2 x Dell monitors
• Thermo Single Position Baseplate with Thermo Gas Specific Triple Filter Helium (S/N: C169436)
• ThermoFisher Ion Volume Insertion/Removal Tool
• Edwards 3 Pump
• ProXeon
• 2 x Pressure Regulators (Model: C202/2-BS3-1/8, Model: C106/2-BS3-1/4)
• Manual: Thermo Scientific LTQ Orbitrap Velos Hardware Manual