3D Systems ProJet 460Plus CJP Full-Colour 3D Printer, Consumables & Spares

3D Systems ProJet CJP 460Plus 3D Printer

This item was removed from a university laboratory where it was surplus to requirements.

It is in good cosmetic condition with some staining present.

Powers on, goes through initialisation stages and shows "Online" message, tested a few functions such as raising and lowering the stage, and vacuum which all worked fine.

Previous owner states it is fully functional. No test prints have been carried out. Will require a new HP11 print head and a new binder cartridge soon (previous owner states there is still enough binder to print).

Included;

HP57 print head to install when ready to print.

Approximately 7Kg of PXL core material.

7 x spare waste trays

Box of accessories, including

cleaning solution. Software - 3D print Various tools and maintenance items.

Specifications;

Build speed: between 2 to 4 layers per minute

Build volume

X-axis: 8 inches (203 mm) Y-axis: 10 inches (254 mm) Z-axis: 8 inches (203 mm) Build capacity: 640 cubic inches

Layer thickness

Minimum: 0.0035 inches (0.089 mm) Maximum: 0.004 inches (0.102 mm)

Color shell thickness: 0.025 inches

Resolution: 300 x 450 dpi

Materials

Powder: zp130 Binder: zb59

Print heads

HP11 (clear binder) HP57 (single tricolor CMY)